Name: Jebao CP-25 Cross Flow Wavemaker With Controller
SKU: 1276
Availability: InStock

Jebao CP-25 Cross Flow Wavemaker With Controller

Tank Size 26-105Gallon, Glass Thickness up to .5″
Flow up to 2377g/h (Cross Flow for Whole Tank)
Power 100V to 240V 50/60hzDC1.7A 25W
Super Extreme Magnet Include
Size 11.2″ x 2.2″ x 1.5″

JECOD Aquarium Wave Maker CP-25 With controller

Crossflow technology make the flow return to pump directly 360 degree without dead spots create different type of the flow similar as wave maker. Clockwise the flow as you set mode h : normal flow rate as the speed output w1: wave box function ~ idea for set a pulse mode for set wave box function w2: normal mode with clockwise 4mins to 99mins w3: normal mode with reef mode feed mode 10mins.

Assembly Notice:

Suitable for most sizes of the fish tank, the tank thickness of less than 15 mm would be better.
Access: controlelr, adapter, power cable, cross flow pump, user’s manual.
pump assembly

The cross flow pump has a built-in safety mechanism. you must first connect the cable from the controller to the pump then connect the cable from power supply to the controller.
please use the magnet mount set to locate the cross flow wave pump where you intend to install. Install the wet side magnet firstly, then move the dry side magnet to fix the pump. Do not place your fingers between the magnet mount set as there is a strong mechanism. please reference the install instruction photos as below.
clean the glass before assembly the pump.
magnet holder clamp upto a glass of thickness of 15mm or need to buy extra magnet holder set if glass thicker than 15mm.
Rotate the Flow cages clockwise to adjust the angle of water flow.
Attention.