Hanna pHep Pocket-sized pH Tester HI98107P

Featuring a large easy-to-read LCD screen, the tester provides fast and accurate pH readings in a rugged and ergonomically designed casing. The HI 98107 has a replaceable electrode and renewable reference junction, which helps prolong the life of this tester. With the replenishable junction, simply pull 1 to 2mm (1/8”) of the junction out with tweezers to recondition the pH electrode. This procedure can be repeated up to 15 times, before the whole fiber is removed.

pH Electrode with renewable junction  

• With a renewable cloth junction, the pHep® has an extended life over typical pH testers. A normal junction clogs with use over time and a typical tester would normally have to be thrown away once the junction is too contaminated. HI 98107’s junction is 2 cm long and when dirty, can be pulled out to expose a fresh section to effectively renew the pHep’s life.

Calibration

• Calibration is performed manually at 1 or 2 points with a trimmer located on the side of the tester.
Battery
• With a battery life of 700 hours of continuous use, the pHep® will provide years of testing before the batteries need to be replaced.

PRODUCT DESCRIPTION

• pH Range: 0 – 14
• Resolution: 0.1 pH
• Accuracy: +/- 0.1 pH
• Calibration: Manual, 2 point, through offset and slope trimmers
• Electrode: In-build / Glass with renewable cloth junction
• Power source: 4 x 1.5V alkaline / approximately 700 hours of continuous use
• Environment: 0 to 50°C (32 to 122°F); RH max 95%
• Dimensions: 175 x 41 x 23 mm (6.9 x 1.6 x 0.9’’)
• Weight: 95 g

FEATURES:

• Measures pH and Temperature
• One-touch automatic digital calibration
• Water resistant
• Simultaneous temperature display
• Large LCD display
• Automatic Temperature Compensation (ATC)
• Auto-off function, data-hold function and low-battery indicator
• Factory Calibrated: The PH-80 meter is factory calibration to pH 7.0.
• Includes a translucent cap, batteries, storage solution and pH 7.0 buffer (powder)